1. Preparation / Washing

• Preparation is KEY. Wash and clean the area to be applied thoroughly.
• Dry the application area and degrease well with Xpro degreaser.
• Make sure the area is dry before applying.

2. Appendix

• Shake the bottle.
• We recommend applying the product with a folded paper towel or with an Xpro applicator, as these applicators allow the best application of Xpro car polish.
• Make sure they are thoroughly soaked with varnish.
• We recommend keeping the bottle handy – if the towel | your applicator starts to dry out during application, apply more as you process.
• Start from the top corner of the panel.
• Hold the towel | the flat hand applicator. Using very light pressure, slide from end to end along the panel. Apply the product evenly to the panel.
• You will have a 1-2 minute window to work. Do not go back after this period of time. Avoid repeats!!!

*** Please note that if there is a significant mistake made in the application of your coating and you need to remove it - removing the coating is much easier within 5 minutes of the initial application. If you need to remove the coating in this 5 minute window, we recommend scrubbing the coating with our degreaser. You can then re-apply Xpro Car Polish .. If you need to remove the coating after it has already started to harden, we recommend sanding the area with p2000 water sandpaper.