Frequently Asked Questions
Тъй като Xpro е течен полимерен автомобилен лак, а не временно козметично мазило, ефектът от заличаването на драскотините е перманентен. Веднъж втвърдил се върху детайла, лакът остава постоянно и не може да бъде отмит от дъжд, сняг или безконтактно миене на автомивка в период до 2 години .
За разлика от масовите автомобилни пасти, вакси или силиконови филъри, които предлагат временен маскиращ ефект до първото измиване, Xpro е истински автомобилен лак. Той не съдържа временни масла. След нанасяне продуктът запълва микродефектите и се втвърдява в устойчив полимерен слой, който се превръща в част от покритието на автомобила и издържа на агресивна химия и високо налягане на автомивките.
Apply to panels with temperature between 5-30°C and humidity below 90%.
Work in a well-ventilated area or in the shade.
Use on a small panel first before making a whole vehicle.
Use very light pressure, with a flat hand, sliding from end to end.
Dispose of properly used towels in a closed metal container with soap and water.
Резултатът зависи изцяло от правилното почистване и обезмасляване на детайла.
Производителят гарантира за качеството на продукта, но не може да влияе върху начина и условията на употреба.
Xpro innovative car polish does a great job of penetrating and covering scratches in the paint finish. It is not designed for scratches deep in the base coat, although it can improve their appearance cosmetically. We recommend wetting your vehicle's panel before purchase and seeing if you like the look - the result of Xpro Innovative Automotive Varnish will look similar to a wet panel, but with more depth. Xpro innovative automotive lacquer is designed to improve the cosmetic appearance of vehicles with 60-90%
Yes, the environment is important. Unlike many competing products, the preparation can be applied externally. Ideally, apply and allow to dry in a garage or other ventilated covered area. We recommend application to panels that are between 5-30°C (optimum temperature is 10-35°C) and in environments with humidity below 90% to avoid extreme heat or moisture factors.
Hrgo innovative car varnish performs better on car parts with clear coat still available. But in many cases can be used to improve the appearance and protection of one-step paint. In case of severe damage, it may be necessary to apply additional coatings after 4 hours of curing.
The product needs 4 hours to cure. DO NOT touch the area or allow it to get wet for at least 24 hours after application. The more product you put on, the longer it will take to cure.
Make sure you use enough product to keep the cloth or sponge wet all over the panel. We recommend keeping the bottle handy; if your cloth or sponge starts to dry during application, apply a little more.
Not exactly. Ceramic coatings are commonly used to make newer cars easier to clean. Hrgo is used to add depth and improve the appearance of a damaged lacquer finish. We do NOT recommend using Hrgo on ceramic coating. However, you can use ceramic coating via Hrgo coating after waiting 48 hours.
Removal is easiest within 2-3 minutes after application - simply scrub with our degreaser. Then you can reapply. If the coating has already begun to harden, we recommend sanding the area with 2000 grit water sandpaper, cleaning and reapplying.
Да. Като официален производител в рамките на Европейския съюз, „Голдън Стар 88“ ЕООД гарантира пълна регулаторна съответственост съгласно изискванията на ECHA (Европейска агенция по химикали). Всички наши продукти отговарят на европейските стандарти, притежават професионални информационни листове за безопасност (MSDS), технически карти (TDS) и официално регистрирани UFI кодове (Уникален идентификатор на формулата) в европейския портал за нотификация на центровете по токсикология (PCN).
Можете да измиете автомобила 72 часа след нанасяне. Препоръчваме ви да НЕ карате автомобила на автоматична автомивка (с валяци) след нанасяне. Известно е, че автоматичните автомивки повреждат обикновения автомобилен лак, така че те могат да направят същото с покритието . Нашата препоръка е ръчно измиване, електрическо измиване или прекарване на автомобила през безконтактна автомивка.
Xpro innovative car polish is designed to help bring back the shine to headlights, plastic, chrome and vehicle paintwork. It is not intended for use on windows.
Cleaning and preparation is the KEY. Thoroughly wash the area you will be applying with water and dry thoroughly. Then clean the area with Xpro degreaser (clay bar for additional preparation). Make sure the area is dry before application.
Продукта се нанася само и единствено с апликатора на Xpro .
Yes, can be great for improving the appearance and protecting peeling coating in many cases. Note that it performs better on parts where clearcoat is still available. In case of severe damage it is necessary to apply additional coatings after 4 hours of curing.
Не използвайте натиск върху аплкатора при работа с Xpro .
Yes, the product is very effective in improving the appearance and protecting sun damaged clear coat. In case of severe damage you may need to apply an additional coat after 4 hours.
If you have experience, you can lightly buff or sand with fine water sandpaper (p2000) the heavily damaged areas before application for a better result. If you grind or polish following application, make sure you wait 48 hours.
It is important not to let the area get wet for 24 hours after application. If rain is expected, leave the car indoors. Ensure that the temperature remains above 5°C and there is no precipitation during the curing process.
If you miss a spot or make a mistake in the first 1-2 minutes, draw a full, gentle line back through that area. You have a 2-3 minute window to work; DO NOT return to an area after this period. If you want to remove the application in the first 5 minutes, use degreaser.